Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Cisco - 7206VXR/NPE-G1 - 7206VXR with NPE-G1 includes 3GigE/FE/E Ports and IP SW

  • 10102707-014
Artikel-Nr.: 10102707-003
auf Anfrage

Lieferzeit ca. 5 Tage

Artikel-Nr.: 10102707-014
642,50 €
inkl. MwSt. zzgl. Versandkosten
Nettopreis: 539,92 €
Verfügbar: 2

Sofort,
Lieferzeit 1-4 Werktage

Jetzt Angebot / Verfügbarkeit anfragen !
  • 3 Jahre Garantie
  • schneller Versand
  • persönlicher Kundenberater
  • Konfiguration Ihrer Hardware

Produktbeschreibung

7206VXR with NPE-G1 includes 3GigE/FE/E Ports and IP SW
mehr
Dimensions & Weight
Depth: 43.2 cm
Height: 13.3 cm
Width: 42.7 cm
Environmental Parameters
Humidity Range Operating: 10 - 90%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Expansion Slots: 8 (total) / 7 (free) x expansion slot ¦ 2 (total) / 0 (free) x memory ¦ 1 CompactFlash
Installed Modules Qty (Max): 1 (installed) / 8 (max)
Interfaces: 3 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ Management: 1 x console ¦ Management: 1 x auxiliary ¦ 3 x GBIC
General
Authentication Method: RADIUS, PAP, CHAP, TACACS
Compliant Standards: IEEE 802.1Q, FCC Class A certified, VCCI Class B ITE, EN 60950, EN55022, IEC950, UL 1950, CSA 22.2 No. 950
Connectivity Technology: Wired
Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
Data Transfer Rate: 1 Gbps
Device Type: Router - with Cisco 7200VXR NPE-G1 Network Processing Engine
Enclosure Type: Rack-mountable - modular - 3U
Features: Modular design, full duplex capability, DHCP support, NAT support, RARP support, ARP support, VLAN support
Flash Memory: 64 MB (installed) / 256 MB (max)
Network / Transport Protocol: TCP/IP, UDP/IP
Processor: 1 x Broadcom BCM1250 700 MHz
RAM: 256 MB (installed) / 1 GB (max) DDR SDRAM
Remote Management Protocol: SNMP, Telnet
Routing Protocol: OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, HSRP
Power
Installed Qty: 1 (installed) / 2 (max)
Power Device: Internal power supply - hot-plug
Power Redundancy: Yes
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS IP Plus
Zuletzt angesehen