JUNIPER - M7IBASE-AC-1GE - Juniper M-series M7i - Modulare Erweiterungseinheit

JUNIPER - M7IBASE-AC-1GE - Juniper M-series M7i - Modulare Erweiterungseinheit
  • 10208629-014
Order number: 10208629-003
on request

Delivery time approx. 5 working days

Order number: 10208629-014
on request

Delivery time 4 Workdays

Please inform me as soon as the product is available again.

  • 3 year warranty
  • Same day shipments via UPS
  • personal account manager
  • technical support and configurations

Product Description

Juniper M-series M7i - Modulare Erweiterungseinheit
more
Dimensions & Weight
Depth: 45.7 cm
Height: 8.9 cm
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 5 - 90%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x PC Card ¦ 4 (total) / 4 (free) x expansion slot
Installed Modules Qty (Max): 0 (installed) / 4 (max)
Interfaces: 1 x Ethernet 1000 ¦ Management: 2 x RS-232 - 9 pin D-Sub (DB-9) ¦ Management: 1 x 10Base-T/100Base-TX - RJ-45 ¦ 1 x SFP (mini-GBIC)
General
Authentication Method: RADIUS
Compliant Standards: IEEE 802.1Q, BSMI, VCCI Class B ITE, EN 60950, EN 61000-3-2, IEC 825-1/EN 60825-1 class 1, UL 60950, EN55022 Class B, AS/NZ 3548 Class B, FCC Part 15 B, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CSA C22.2 No. 60950-00, EN 61000-4-5, EN 61000-4-11
Connectivity Technology: Wired
Data Link Protocol: Gigabit Ethernet
Device Type: Modular expansion base
Enclosure Type: Desktop - modular
Encryption Algorithm: DES, Triple DES, MD5, SHA-1
Features: Modular design, firewall protection, hot swap module replacement, 56-bit encryption, 168-bit encryption, Layer 3 switching, Layer 2 switching, DHCP support, NAT support, VPN support, MPLS support, VLAN support, Syslog support, traffic shaping, DoS attack prevention, packet filtering, DiffServ support, IPv6 support, High Availability, firmware upgradable, DDos attack prevention
Network / Transport Protocol: TCP/IP, IPSec, PPPoA
Remote Management Protocol: SNMP 2, SNMP 3, HTTP
Routing Protocol: OSPF, IS-IS, RIP-2, BGP, DVMRP, PIM-SM, static IP routing, PIM-DM, IGMPv3, PIM-SSM
Status Indicators: Link OK, fail, alarm, link/activity
Power
Installed Qty: 1 (installed) / 2 (max)
Power Device: Internal power supply - hot-plug
Power Redundancy: Yes
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: JUNOS
Viewed