Découvrez maintenant nos offres de maintenance et de location!

Cisco - WS-C3560X-48U-L - Catalyst 3560x gemanaged L2 Gigabit Ethernet (10/100/1000) Energie Übe

  • 10128516-003
Réf. d'article : 10128516-003
Sur demande

Délai de livraison env. 5 jours

Réf. d'article : 10128516-014
Sur demande

Délai de livraison env. 5 jours

Avertissez-moi lorsque l'article sera de nouveau disponible.

  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Cisco Catalyst WS-C3560X-48U-L. Type de commutateur: Géré, Banc de commutateurs: L2. Type de port Ethernet RJ-45 de commutation de base: Gigabit Ethernet (10/100/1000), Quantité de ports Ethernet RJ-45 de commutation de base: 48. Full duplex. Répertoire MAC: 12000 entrées, Capacité de commutation: 160 Gbit/s. Standards réseau: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ab,IEEE.... Connexion Ethernet, supportant l'alimentation via ce port (PoE). Grille de montage, Format: 1U
plus

Informations sur le produit

Dimensions & Weight
Depth: 49.5 cm
Height: 4.45 cm
Weight: 7.6 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 5 - 95% (non-condensing)
Max Storage Temperature: 70 °C
Min Operating Temperature: -5 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x Expansion Slot
Interfaces: 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 UPOE - 60 W ¦ 1 x USB Type A ¦ 1 x mini-USB console - mini-USB Type B - Type B management ¦ 1 x console RS-232 - RJ-45 - RJ-45 ¦ 1 x 100Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management
General
Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity: Virtual interfaces (VLANs): 1005 ¦ Switched virtual interfaces (SVIs): 1000
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at, IEEE 802.3az
Device Type: Switch - 48 ports - Managed
Enclosure Type: Rack-mountable 1U
Features: Hot swap module replacement, Layer 2 switching, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN)
Flash Memory: 64 MB
Jumbo Frame Support: 9216 bytes
Performance: Switching fabric bandwidth: 160 Gbps ¦ Forwarding performance: 101.2 Mpps
PoE Budget: 800 W
Ports: 48 x 10/100/1000 (UPOE)
Power Over Ethernet (PoE): UPOE
RAM: 256 MB
Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Status Indicators: Port status, port transmission speed, port duplex mode, power, system, link/activity
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: NEBS level 3, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, AS/NZS 3548 Class A, CAN/CSA-C22.2 No. 60950-1
MTBF: 189,710 hours
Rack Mounting Kit: Included
Power
Features: Redundant Power System (RPS) connector
Installed Qty: 1 (installed) / 2 (max)
Power Consumption Operational: 122.06 Watt
Power Device: Internal power supply
Power Provided: 1100 Watt
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with optional power supply)
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco IOS LAN Base
Derniers articles consultés