Cisco - AIR-AP2802E-E-K9 - 802.11ac W2 AP w/CA; 4x4:3; Ext Ant; 2xGbE, E Domain new and refurbished buy online low prices

Aperçu: Cisco - AIR-AP2802E-E-K9 - 802.11ac W2 AP w/CA; 4x4:3; Ext Ant; 2xGbE, E Domain

Cisco - AIR-AP2802E-E-K9 - 802.11ac W2 AP w/CA; 4x4:3; Ext Ant; 2xGbE, E Domain

Réf. d'article : 10113708-003

Questions sur l'article ?

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Fermer menu

Description du produit

Cisco AIR-AP2802E-E-K9. DÃ©bit de transfert des donnÃ©es maximum: 5200 Mbit/s, Taux maximum de transfert des donnÃ©es via le rÃ©seau local sans fil: 2600 Mbit/s, LAN Ethernet : taux de transfert des donnÃ©es: 10,100,1000 Mbit/s. Algorithme de sÃ©curitÃ© soutenu: 802.1x RADIUS,EAP-FAST,EAP-PEAP,EAP-SIM,EAP-TLS,EAP-TTLS,MSCHAPv2,PEAP,WPA,WPA2. Positionnement: Plafond, Mur, Couleur du produit: Blanc, Certification: UL 60950-1 CAN/CSA-C22.2 No. 60950-1 UL 2043 IEC 60950-1 EN 60950-1 EN 50155 FCC Part 15.107,.... Type d'antenne: Externe, Antenna features: Detachable antenna, Niveau de gain de l'antenne (max): 6 dBi. MÃ©moire flash: 256 Mo, MÃ©moire interne: 1024 Mo

plus

Expansion / Connectivity
Interfaces:	2 x 1000Base-T - RJ-45 ¦ 1 x console - RJ-45

General
Depth:	22.3 cm
Device Type:	Radio access point
Height:	6.35 cm
Ruggedized Design:	Indoor
Width:	22 cm

Miscellaneous
Included Accessories:	Mounting brackets, ceiling mounting kit

Networking
Compliant Standards:	IEEE 802.11b, IEEE 802.11a, IEEE 802.3ad (LACP), IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Connectivity Technology:	Wireless
Data Link Protocol:	IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Data Transfer Rate:	5.2 Gbps
Features:	DFS support, CleanAir technology, LACP support, Maximum Ratio Combining (MRC), CAPWAP support, 4T4R MIMO technology, cyclic shift diversity (CSD), MU-MIMO technology, beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, Optimized AP Roaming, Cross AP Noise Reduction, MIMO equalisation, ClientLink 4.0 technology
Form Factor:	External
Frequency Band:	2.4 GHz, 5 GHz
Status Indicators:	Boot State, error, status, operation mode