Découvrez maintenant nos offres de maintenance et de location!

Cisco - C819HGW+7-N-K9 - C819 M2M Hardened 3.7G HSPA+ (non-US) w/ Dual Radio WiFi

  • 10112219-014
Réf. d'article : 10112219-003
Sur demande

Délai de livraison env. 5 jours

Réf. d'article : 10112219-014
874,50 €
Prix dont TVA plus frais de port
Prix ​​net:734,87 €
Disponible: 1

Prêt à expédier immédiatement,
délai de livraison env. 1-3 jours ouvrés

Questions sur l'article ?
  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Switch, Wireless
plus
Aerial
Aerial: External detachable
Antenna Qty: 5
Communications
Cellular Protocol: GPRS, UMTS, EDGE, HSDPA, HSPA+
Max Transfer Rate: 21 Mbps
Type: Wireless cellular modem
Dimensions & Weight
Depth: 22.9 cm
Height: 4.4 cm
Weight: 1.54 kg
Width: 18.6 cm
Environmental Parameters
Max Operating Temperature: 60 °C
Min Operating Temperature: -25 °C
Expansion / Connectivity
Expansion Slots: 2 (total) / 2 (free) x SIM
Interfaces: WAN: 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x RJ-45 ¦ USB: 1 x mini-USB Type A
General
Authentication Method: RADIUS, TACACS+
Capacity: Connection / user qty: 20
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.11ac, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, FCC CFR47 Part 15, UL 60950-1 Second Edition, EN 301.511, BSMI CNS 13438, EN 301.908, VCCI V-3, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, EN 301.489-7, EN 301.489-24, EN 301 489-1, EN 300 386
Connectivity Technology: Wireless, wired
Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Device Type: Wireless router - 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: DES, Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features: Firewall protection, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, content filtering, DiffServ support, MAC address filtering, IPv6 support, Intrusion Prevention System (IPS), firmware upgradable, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, CleanAir technology, DHCP relay, DHCP client
Flash Memory: 1 GB (installed) / 1 GB (max)
Frequency Band: 2.4 GHz / 5 GHz
Network / Transport Protocol: L2TP, IPSec, DHCP, L2TPv3, DDNS
RAM: 1 GB (installed) / 1 GB (max)
Remote Management Protocol: Telnet, SNMP 3, HTTP, SSH, CLI
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)
Status Indicators: System, active, wireless
Miscellaneous
MTBF: 293,000 hours
Power
Power Consumption Operational: 20 Watt
Power Device: External power adapter
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced IP services
Derniers articles consultés