Cisco - AIR-AP1832I-B-K9C - 802.11ac Wave 2; 3x3:2SS; Int Ant; B Reg Domain (Config) new and refurbished buy online low prices

Aperçu: Cisco - AIR-AP1832I-B-K9C - 802.11ac Wave 2; 3x3:2SS; Int Ant; B Reg Domain (Config)

Cisco - AIR-AP1832I-B-K9C - 802.11ac Wave 2; 3x3:2SS; Int Ant; B Reg Domain (Config)

Réf. d'article : 10111565-003

Questions sur l'article ?

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Fermer menu

Description du produit

Cisco Systems - AIR-AP1832I-B-K9C - Cisco Aironet 1830. Débit de transfert des données maximum: 1000 Mbit/s, Maximum data transfer rate (5 GHz): 867 Mbit/s, LAN Ethernet : taux de transfert des données: 10,100,1000 Mbit/s. Algorithme de sécurité sout

plus

Aerial
Antenna:	Internal
Directivity:	Omni-directional
Gain Level:	5 dBi

Environmental Parameters
Humidity Range Operating:	10 - 90% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	1 x 1000Base-T (PoE+) - RJ-45 ¦ 1 x console - RJ-45 ¦ 1 x USB 2.0 - Type A

General
Depth:	21.08 cm
Device Type:	Radio access point
Height:	50.8 cm
Localisation:	Puerto Rico, United States
Ruggedized Design:	Indoor
Weight:	1.41 kg
Width:	21.08 cm

Miscellaneous
Compliant Standards:	VCCI, ICES-003, FCC Part 15.247, RSS-210, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, ARIB STD-T66, ARIB STD-T71, EMI, EN 300 328, FCC OET Bulletin 65c, EN 301 489-1, CAN/CSA-C22.2 No. 60950-1

Networking
Authentication Method:	MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards:	IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac (draft 5.0)
Connectivity Technology:	Wireless
Data Link Protocol:	IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac (draft 5.0)
Data Transfer Rate:	1 Gbps
Encryption Algorithm:	AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2
Features:	DFS support, Wi-Fi Multimedia (WMM) support, Maximum Ratio Combining (MRC), 3T3R MIMO technology, 802.1x authentication, cyclic shift diversity (CSD), beamforming technology
Form Factor:	External
Frequency Band:	2.4 GHz, 5 GHz
Status Indicators:	Status

Power
Power Consumption Operational:	16 Watt
Power Device:	External power adapter
Power Over Ethernet (PoE) Supported:	PoE+
Voltage Required:	AC 120/230 V (50 - 60 Hz)