Découvrez maintenant nos offres de maintenance et de location!

Cisco - WS-C2960+48PST-L - Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Base

  • 10108796-014
Réf. d'article : 10108796-003
Sur demande

Délai de livraison 4 Jours ouvrés

Réf. d'article : 10108796-014
158,50 €
Prix dont TVA plus frais de port
Prix ​​net:133,19 €
Disponible: 2

Prêt à expédier immédiatement,
délai de livraison env. 1-4 jours ouvrés

Questions sur l'article ?
  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Base
plus
Dimensions & Weight
Depth: 33.2 cm
Height: 4.4 cm
Weight: 5.4 kg
Width: 45 cm
Environmental Parameters
Humidity Range Operating: 10 - 95% (non-condensing)
Humidity Range Storage: 10 - 95% (non-condensing)
Max Operating Temperature: 40 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: -5 °C
Min Storage Temperature: -25 °C
Expansion / Connectivity
Interfaces: 24 x 100Base-TX RJ-45 PoE - 15.4 W ¦ 2 x 1000Base-T RJ-45 ¦ 2 x ¦ 24 x 100Base-TX RJ-45
General
Authentication Method: RADIUS, TACACS+
Capacity: Active VLANs: 255
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Device Type: Switch - 48 ports - Managed
Enclosure Type: Rack-mountable 1U
Features: Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
Flash Memory: 64 MB
Jumbo Frame Support: 9018 bytes
Performance: Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 13.1 Mpps
PoE Budget: 370 W
Ports: 48 x 10/100 (PoE) + 2 x Gigabit SFP + 2 x 10/100/1000
Power Over Ethernet (PoE): PoE
RAM: 128 MB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
Status Indicators: Port status, port transmission speed, port duplex mode, power, system, link/activity
Subtype: Fast Ethernet
Miscellaneous
Compliant Standards: FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, EN 300 386
Rack Mounting Kit: Optional
Power
Features: Redundant Power System (RPS) connector
Power Device: Internal power supply
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco LAN Base software
HP -  J9778A -  HP 2530-48-PoE+ Switch HP - J9778A - HP 2530-48-PoE+ Switch
À partir de 345,50 € *
Derniers articles consultés