Découvrez maintenant nos offres de maintenance et de location!

Cisco - WS-C4928-10GE - Catalyst 4928, no p/s, 28x 1GBase-X SFP, 2x 10GBase-X X2

  • 10104573-014
Réf. d'article : 10104573-003
Sur demande

Délai de livraison env. 5 jours

Réf. d'article : 10104573-014
1193,50 €
Prix dont TVA plus frais de port
Prix ​​net:1002,94 €
Disponible: 1

Prêt à expédier immédiatement,
délai de livraison env. 1-4 jours ouvrés

Questions sur l'article ?
  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

WS-C4928-10GE - Géré - L3 - Grille de montage - 2U
plus
Dimensions & Weight
Depth: 40.99 cm
Height: 4.44 cm
Weight: 7.5 kg
Width: 43.91 cm
Environmental Parameters
Humidity Range Operating: 10 - 90% (non-condensing)
Max Operating Temperature: 40 °C
Max Storage Temperature: 75 °C
Min Operating Temperature: 0 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Interfaces: 28 x SFP (mini-GBIC) ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x X2
General
Authentication Method: Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Capacity: Active VLANs: 2048 ¦ Spanning Tree Protocol instances: 10000 ¦ Switched virtual interfaces (SVIs): 2000 ¦ QoS hardware entries: 32000 ¦ Multicast entries (Layer 3): 28000 ¦ Multicast entries (Layer 2): 16000
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag
Device Type: Switch - 28 ports - L3 - Managed
Enclosure Type: Rack-mountable 1U
Features: Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, auto-negotiation, BOOTP support, ARP support, trunking, Cisco Fast EtherChannel, load balancing, VLAN support, Cisco Gigabit EtherChannel, IGMP snooping, ISL support, Syslog support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Per-VLAN Spanning Tree (PVST), Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), Time Domain Reflectometry (TDR), WCCP 2.0, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Per-VLAN Rapid Spanning Tree (PVRST)
Flash Memory: Flash
Jumbo Frame Support: 9216 bytes
MAC Address Table Size: 55K entries
Performance: Switching capacity: 96 Gbps ¦ Throughput: 71 Mpps
Ports: 28 x Gigabit SFP + 2 x X2
Processor: 1: 666 MHz
RAM: 256 MB SDRAM
Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, Telnet, SNMP 3, HTTP, HTTPS, TFTP, CLI
Routing Protocol: RIP-1, RIP-2, static IP routing
Status Indicators: System, status, console
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: NEBS level 3, FCC Class A certified, CISPR 22 Class A, CISPR 24, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, EN 61000-6-1, ICES-003 Class A, FCC CFR47 Part 15, AS/NZS 60950, CAN/CSA C22.2 No. 60950
Power
Installed Qty: 0 (installed) / 2 (max)
Power Device: Internal power supply - hot-plug
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with optional power supply)
Software / System Requirements
Software Included: Cisco IOS IP Base
CONSEIL !
Derniers articles consultés