Cisco - RSP720-3C-10GE - Route Switch Processor 720 with 10 Gigabit Ethernet uplinks - Router - 1.000 Mbps

Descripción del producto

Cisco - RSP720-3C-10GE - Route Switch Processor 720 with 10 Gigabit Ethernet uplinks - Router - 1.000 Mbps - Plug-In Modul

Expansion / Connectivity
Expansion Slots:	2 (total) / 1 (free) x CompactFlash Card - type II
Interfaces:	Management: 1 x console - RJ-45 ¦ 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ 2 x SFP (mini-GBIC) ¦ 2 x X2 ¦ 1 x USB - 4 pin USB Type B ¦ 1 x USB - 4 pin USB Type A

General
Capacity:	ACL rules: 128000 ¦ IPv4 routes: 256000 ¦ IPv6 routes: 128000 ¦ NetFlow entries: 128000
Compliant Standards:	IEEE 802.1x, CISPR 22 Class A, EN 60950, VCCI Class A ITE, IEC 60950, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, EMC, ICES-003 Class A, FCC CFR21 Part 1040, FCC Part 15 A, IEC 60825-1, EN 60825-1, AS/NZS 3548 Class A, EN 60825-2, IEC 60825-2, EN 300 386
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet
Device Type:	Router
Enclosure Type:	Plug-in module
Features:	Layer 3 switching, Layer 2 switching, dynamic IP address assignment, DHCP support, NAT support, MPLS support, VLAN support, IGMP snooping, traffic shaping, DoS attack prevention, Access Control List (ACL) support, Quality of Service (QoS), MPLS VPN
Flash Memory:	512 MB
Network / Transport Protocol:	TCP/IP, ICMP/IP
Performance:	Switching capacity: 720 Gbps ¦ IPv4 routing: 400 Mbps ¦ IPv6 routing: 200 Mbps
RAM:	2 GB (installed) / 6 GB (max)
Routing Protocol:	OSPF, RIP, BGP-4, IS-IS, PIM-SM, PIM-DM, GRE
Status Indicators:	System, active, status, link/activity