Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Cisco - WS-C2960X-48TD-L - Catalyst 2960-X 48 GigE, 2 x 10G SFP+, LAN Base

  • 10108111-014
Artikel-Nr.: 10108111-003
auf Anfrage

Lieferzeit 4 Werktage

Artikel-Nr.: 10108111-014
372,50 €
inkl. MwSt. zzgl. Versandkosten
Nettopreis: 313,03 €
Verfügbar: 1

Sofort,
Lieferzeit 1-4 Werktage

Jetzt Angebot / Verfügbarkeit anfragen !
  • 3 Jahre Garantie
  • schneller Versand
  • persönlicher Kundenberater
  • Konfiguration Ihrer Hardware

Produktbeschreibung

Catalyst 2960-X 48 GigE, 2 x 10G SFP+, LAN Base
mehr

Produktinformationen

Dimensions & Weight
Depth: 27.9 cm
Height: 4.5 cm
Weight: 4.3 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 95% (non-condensing)
Humidity Range Storage: 10 - 95% (non-condensing)
Max Operating Temperature: 45 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: -5 °C
Min Storage Temperature: -25 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x Stacking Module
Interfaces: 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 ¦ 1 x console console - RJ-45 - RJ-45 ¦ 1 x mini-USB console - mini-USB Type B - Type B management ¦ 1 x USB Type A ¦ 1 x 1000Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management ¦ 2 x SFP+ - SFP+ uplink
General
Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity: Virtual interfaces (VLANs): 1023
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1ae, IEEE 802.3az, IEEE 802.1AX
Device Type: Switch - 48 ports - Managed - stackable
Enclosure Type: Desktop, rack-mountable 1U
Features: Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet
Flash Memory: 128 MB
Jumbo Frame Support: 9216 bytes
Max Units In A Stack: 8
Performance: Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 130.9 Mpps
Ports: 48 x 10/100/1000 + 2 x 10 Gigabit SFP+
Processor: : 600 MHz
RAM: 512 MB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Status Indicators: Port transmission speed, port duplex mode, system, status, link/activity
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, CNS 13438(95) Class A, EN 55022 Class A, EN 300 386
MTBF: 445,460 hours
Power
Features: Redundant Power System (RPS) connector
Power Device: Internal power supply
Power Redundancy: Optional
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco IOS LAN Base
Zuletzt angesehen