Cisco - CISCO886-K9 - Cisco 886 ADSL2/2+ AnnexB Router neu und gebraucht günstig online kaufen

Produktbeschreibung

Cisco 886 ADSL2/2+ AnnexB Router

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST - RJ-45

General
Authentication Method:	RADIUS, TACACS+
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet
Device Type:	Router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), content filtering, dynamic DNS server, MAC address filtering, Broadcast Storm Control, URL filtering, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory:	128 MB
Network / Transport Protocol:	L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
RAM:	256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, FTP, SSH
Routing Protocol:	RIP-1, RIP-2, HSRP, VRRP, GRE
Status Indicators:	Port status, power